Connections DSL Setup

All that is needed to configure Connections DSL is the TCP/IP of your Ethernet Card. To do so, obtain your IP infomation from Sonnek and find your operating system below.

Configuring Network Cards for Win95/98/ME

1. Click on Start ' Settings ' Control Pannel ' Network

2. Find the TCP/IP of the Network Card and select it by clicking once on it

3. Click the Properties button

4. Under the IP Address tab it should be set to Specify IP Address

5. Enter in your IP address.

6. For the Subnet, enter in 255.255.255.0

7. Under the Gateway tab, enter in 207.195.210.254

8. Under the DNS tab, choose specify DNS.

9. Enter in your username in the account spot.

10. Enter in soncom.com for the domain.

11. Enter in 207.195.208.1 for the Primary DNS.

12. Enter in 207.195.208.2 for the secondary DNS.

13. Hit Ok

14. Hit Ok

15. Say Yes to restarting the computer

16. Once computer boots back up connection should work

Windows NT4

1. Click on Start ' Settings ' Control Panel

2. Once you are in Control Panel double click on the Network icon

3. Select the Protocols tab

4. Single Click on TCP/IP

5. Click the Properties button

6. Under the IP Address tab make sure the following is set
A. Make sure the adapter is set to be your network card
B. Select SPecify IP Address and enter in your IP address
C. For the Subnet, enter in 255.255.255.0

7. Under the Gateway tab, enter in 207.195.210.254

8. Under the DNS tab, choose specify DNS.

9. Enter in your username in the account spot.

10. Enter in soncom.com for the domain.

11. Enter in 207.195.208.1 for the Primary DNS.

12. Enter in 207.195.208.2 for the secondary DNS.

13. Click OK

14. Click OK

15. Restart your computer

Windows 2000

1. Right Click on the My Network Places icon located on your desktop and select Properties

2. Double click on the Local Area Network icon

3. Click the Properties button

4. Double click on Internet Protocol (TCP/IP)

5. Select Use the following IP address and enter in your IP address

6. For the Subnet mask, enter in 255.255.255.0

7. For the default gateway, enter in 207.195.210.254

8. For the Preferred DNS server, enter in 207.195.208.1

9. For the Alternate DNS server, enter in 207.195.208.2

10. Click OK

11. Click Ok

12. Click Close

13.Restart your computer

Windows XP

1. Right Click on the My Network Places icon located on your desktop and select Properties

2. Click on the link that says Create New Connection

3. Click Next

4. Choose Connect to the Internet and click Next

5. Choose Set up my connection manually and click Next

6. Choose Connect using a Broadband connection that is always on and click next

7. Enter in Sonnek for the name and click Next

8. Click Finish

9. Right Click on the Sonnek Connection icon and go to Properties

4. Double click on Internet Protocol (TCP/IP)

5. Select Use the following IP address and enter in your IP address

6. For the Subnet mask, enter in 255.255.255.0

7. For the default gateway, enter in 207.195.210.254

8. For the Preferred DNS server, enter in 207.195.208.1

9. For the Alternate DNS server, enter in 207.195.208.2

10. Click OK

11. Click Ok

12. Click Close

13.Restart your computer

Mac OS 8 and Up

1. Click on the Apple Menu

2. Select Control Panels

3. Select TCP/IP

4. In the TCP/IP window Select Ethernet in the Connect Via area

5. Select Specify IP address and enter in your IP address.

6. For the Subnet mask, enter in 255.255.255.0

7. For the default gateway, enter in 207.195.210.254

8. Frot eh Preferred DNS server, enter in 207.195.208.1

9. For the Alternate DNS server, enter in 207.195.208.2

10. Close the window

11. Click the Save button

12. Select Restart on the Special Menu to restart your computer